Search results: “john guest” – Page 2
Showing 21–40 of 92 results
-
150mm Carbonation Stone with 1.5″ Tri Clamp Adapter
£75.001.5" Tri clamp carb stone kit. Ideal for BrewBuilt and Brewtools unitanks.
-
100mm Duotight Long Shank – Stainless Steel
£16.66100mm Duotight Long Shank - Stainless Steel
-
John Guest Locking Clip for 3/8 Fittings – 10 Pack
£2.92Adds total security to all of your 3/8 gas and beer lines
-
John Guest Locking Clip for 3/8 Fittings
£0.33Adds total security to all of your 3/8 gas and beer lines
-
30mm Stainless Steel Tap Shank
£18.29Fit a beer tap in the smallest of spaces
-
John Guest Straight Adaptor – 3/8 to 1/2 BSP Male
£3.13Add 3/8 gas line to any 1/2 threaded fitting
-
John Guest Flow Bend Clip 3/8″ Line
£1.21Supports 3/8 Line and Eliminates Kinking
-
John Guest Strain Relief Boot 3/8″ line
£4.38Anti Kinking Device 3/8" Line
-
John Guest 3/8 push fit to 3/8 BSP Adapter PI011213S
£2.50Screws onto the Grainfather conical in place of the exit outlet
-
John Guest 5/16 push fit to 1/4 FFL Adapter PM4508F4S
£2.50Screws onto the the keg grey and black disconnects and is a push fit for the 5/16 beer/gas line.
-
Offer
ITW PRT Gov Reg Starter Kit – Inline Gas Pressure Regulators and Adjuster
£90.83Inline gas pressure control on your home brew dispense system. Set individual gas lines at different PSI levels. Also...
Read More -
John Guest 3/8″ Equal Elbow PI10312s
£3.04John Guest 3/8" Equal Elbow
-
John Guest 3/8 to 5/8 BSP adapter PI451215FS
£3.75This fits on the thread of most tap shanks.
-
JOHN GUEST 1/4 FFL Female to 3/8″ Line Adapter PI4512F4S
£2.50Screws onto black and grey disconnects and is a push fit for the 3/8 beer/gas line.
-
1.5″ Tri-Clamp to 1/4″ MFL Fitting
£11.671.5 inch TC to 1/4 inch Male Threaded Flare Fitting. 304 Stainless Construction.