Brewing from grain is an extremely rewarding hobby that is multi faceted, brewers can enter the hobby not just for the joy of the end product but the entire process getting there. With this complete set up you can brew 23 litres ( 40 pints ) of any beer style you choose, we have hundreds of recipes available to purchase along with blog posts and instructional videos to help along the way.
Whilst there are one pot systems available such as The Grainfather, this set up gives a somewhat more hands on approach giving that real hand crafted appeal to the final product.
This system is perfect for both the beginner and experienced brewers who would like a step up in equipment. This complete setup includes a pump that can be utilised during the mashing process, recirculating the wort. This produced higher efficiency from your grain and achieves crystal clear wort. Once the boil stage is finished the pump then comes into use again, this time for whirlpooling. This increases hop utilisation and concentrates the “TRUB” to the centre of the kettle allowing clear wort to be drained from the side of the kettle.
The kettle is designed to be heated using a domestic electric, gas or induction hob. Stand alone induction hobs are available from here
The 304 grade stainless steel kettle including hop filter, dial temperature gauge with brewing parameters, etched volume markings and silicone finished handles that allow the lid to hang on the side. The two piece valve for emptying the vessel is finished with a hose barb that is suitable for the supplied silicone tubing.
The kettle is suitable for use with both whole leaf and pellet hops It is simply set up differently, with the bazooka style hop filter being utilised for whole leaf hops only. If pellet hops are being used the kettle is drained from the side using the supplied hose barb pick up tube.
Complete system includes:-
35L stainless steel kettle with dial temperature gauge, hop filter, stainless 90′ elbow and hose barb to act as a pickup tube , 32l per minute pump with hose barbs on both input and output. Whirlpool return with two piece valve and hose barb for the return from the pump, 90′ stainless elbow and hose barb on the inside of the kettle to create whirlpool effect. 3m Silicone tubing.
The kettle in this product has been used in-house for a couple of test brews and shows marks consistent with use in brewing – please see the pictures below.
However, please note that the hop filter, pump, and silicone hose etc. will be supplied brand new and unused.