Description
Counter Pressure Bottle Filler
Want to bottle beer from your keg? Reduce fobbing, and reduce risk of oxygenation with the counter pressure bottle filler.
A simple push fit into your beer tap nozzle, push fitting for connecting gas line, extends to 310mm in length for varying sized bottles.
Instructions for use:
- Santise the bottle filler by inserting into a PET bottle with sanitiser and squeeze sanitiser through the filler
- Attach the 3/16 Co2 gas line into the Co2 push fit connector, or use included barb for other sizes
- Adjust the Co2 pressure to 1 bar/15 psi
- Adjust the length of the telescopic filler tube to the bottle height
- Insert the tap port into the beer tap
- Push a sanitised bottle onto the filler
- Press the C02 valve for 3 seconds to purge the bottle
- Open the beer tap
- Adjust the filling speed by adjusting the pressure release valve
- Close the beer tap
- Remove the bottle carefully
- Seal bottle with cap
Only for use with forward sealing beer taps; Vent-matic, Perlick or Intertap
Use only for filling beer into bottles
Use protective eyewear. Bottles may break when pressurised
stephen gale (verified owner) –
This is a great little device. It works well and is easy to use and clean. There is minimal wastage and it is quick to fill bottles from a keg. Rather than bottle conditioning my beer, I put it in a keg, force carbonte it, and then use the TapCooler to run off bottles as and when I need them (usually to give beer to friends). This method really reduces the amount of sediment left in the bottom of the bottles. I have a Mangrove Jack’s Kegerator and this definitely needs the extension tube for the TapCooler to be workable. Unless you are going to leave the device permanently attached to a gasline, the ball lock adaptor is also going to be a really handy attachment.
cristinikol (verified owner) –
very easy to use. compact size. cleaning is a very easy and quick
cristinikol (verified owner) –
will not work with Coopers 0.5L bottles but any bung with 8mm hole and size 19-26 mm will work. (neck size of the coopers 0.5 pet bottles =22mm)