The new and improved FermZilla 55L brought to you by the key minds and engineers behind the original Gen1. But with all the tweaks that make it the most cost-effective conical fermenter to date!
The FermZilla has primarily been designed as a pressure fermentation, carbonation and dispensing vessel.However can be converted into a pressurised uni tank with the addition of a pressure kit.
The new FermZilla allows home brewers and small micro-breweries a level of control that meets everyone’s budget. With the FermZilla you have the many of the benefits of a much more expensive stainless conical fermenter but with the additional benefit of being able to watch the fermentation process in action and also ferment at pressures up to 2.4bar.
This is an incredible product at an extremely attractive price point and available in FermZilla 27L and FermZilla 55L sizes.
These units were designed for use with CO2.
The Fermzilla comes with a stainless steel hand that fits around the neck of the conical to make lifting easier.
New and Improved:
1. Larger Dump Valve
2. Larger opening
3. Pressure rating 2.4bar (35psi)
In The Box:
1 x FermZilla 55L Tank with Butterfly Dump Valve Parts (Pre-Assembled & Attached)
1 x Reinforced Stainless Steel Stand with Handles
1 x Top Lid with Red PRV (35psi) [2 x Male Cap Threads] [Up to 4 drill ports for accessories]
1 x Top Lid Screw Cap
1 x 1000mL Collection Container & Lid* [2 x Male Cap Threads]
1 x KegLand Adjustable Easy Opening Tool
1 x Premium 3 Piece Airlock
1 x Approximate Graduations Sticker
1 x Strip Stick On Thermometer
3 x Black Bottle Caps (Attached)
1 x Grommet Bottle Cap (Airlock Port)
1 x Spare Seals
Collection container lid is not pressure rated*
When using this vessel under pressure, you must perform a water pressure check to ensure your connections are leak proof. To do this, fill your FermZilla up with water, then apply a minimum of 15psi pressure to the vessel. Check for leaks around all threads and the top lid.
Occasionally these units may come with some small indentations/dimples/dents from shipping, this is just a reality of shipping large blow-moulded thin-walled vessels. But dont panic, these fermenters are designed to endure minor deformations such as this. This was a necessary implementation into the design so that they can withstand some accidental suction from cold crashing and rough handling in transit without compromising their integrity and ability to endure high pressures. All small dents will push out and settle with use and positive pressure and are only an issue and warrant replacement in the rare event they start to show white stress patterns or have damaged the plastic.
To download the instruction sheet for this product click on the link below:
FermZilla Instructions for 27L and 55L
Please read instructions thoroughly before use. The current version can be found in the instructions tab above.