This Phosphoric based sanitiser is a high foam, acidic sanitiser with a synergistic blend providing a unique killing system. The product is formulated to impart no off-flavours and is a non-rinse sanitiser when used at the recommended concentrations. It is also stable over a wide temperature range making it ideal for use in hot or cold water.
Use at a rate of 1.5ml per litre of water.
This sanitiser is effective against a large range of microbes including Escherichia coli and Staphylococcus aureus.
Phosphoric Acid 50%
Dodecylbenzenesulfonic Acid 13%
Inert/Proprietary Ingredients 35%
Avoid contact with skin, eyes and clothing. If any contact with eyes or clothing occurs rinse with fresh water for 15 – 20 minutes.
Instructions fo ruse
Remove all debris, food particles and soil from the surface by a pre-flush, scrape, or soaking. We highly recommend using a Sodium Percarbonate solution to remove stubborn solid debris from your brewing equipment.
Then thoroughly wash surface with detergent then rinse with potable water.
Prepare a set amount of water first in your dilution jug/bucket then add the corresponding amount of StellarSan at 1oz/5gallons or 1.5mL/1Liter. Adding the water first aids in overfoaming when filling from a tap, and also helps prevent seal and washer exposure to acid burn.
Apply on surface with a mop, cloth sponge, spray or immersion.
When correctly diluted this solution will add 300ppm of dodecylbenzenesulfonic acid and 780ppm of phosphoric acid.
Do not use on wood, unglazed porcelain or other porous materials. Not suitable for use on soft metal such as aluminium, copper & brass.
Causes eye damage or skin burns.
Harmful if swalloed or absorbed through your skin or inhaled.
Do not get in eyes, skin or clothing. Always wear protective gear such as eye goggles and gloves when using this product.
Do not mix with chlorine based sanitisers or chlorinated based cleaners.