Tapcooler Nanocanner™ IM is the new can filling attachment for the Tapcooler Counter Pressure Filler. It fits any 202 end cans, regular and sleek, and of any height. The upper rim of the can is clamped to the silicone seal of the can holder, and with it’s 1.5 bar pressure rating you can fill the can with the back pressure you desire. Extend the telescopic tube of the counter pressure filler to purge and fill from the bottom of the can, and we recommend purging through the pressure relief valve, with the can connected to the can holder.

Choose between a wall bracket for fixed setup or a magnetic bracket (Sold Seperately) for super quick setup on a fridge door. The brackets interlinks easily to make a dual, triple or quadruple head can filler.

The can holder assembly consists of a main body, four hinged rim holders, a silicone seal and a lift ring.

The lift ring is attached to the can holder body by four cylindrical head screws in the curved tracks in the lift ring, and when the lift ring lever is pushed to the left, the lift ring pushes the rim holders upwards against the rim of the can, pressing the can against the silicone seal.

The silicone seal has a small extension for each rim holder, acting as springs, to keep the rim holders open when the lift ring is down. Most of the current batch also have tiny torsion springs for the rim holders, these will be omitted in future batches.

Additional items needed:
Tapcooler Counter pressure filler
Beer valve connector (or 2 m extension tube if filling from taps)

Tapcooler Nanocanner Bracket Wall or Tapcooler Nanocanner Bracket Magnetic

Recommended items:
Drain tube