BREWTOOLS - Accessories
Showing 161–180 of 219 results
-
Brewtools – TC34mm o2/co2 stone holder, barbed
£32.00TC34mm holder for oxygenation/carbonation stones
-
Brewtools – TC34 tol 19/32″ Ball Lock Conn. Adapter
£14.99TC34mm adapter to 19/32" threads. With gasket.
-
Brewtools – TC34mm to 10mm hose barb
£15.50Fits 3/8 ID tubing. Can be used for glycol ports on Unitanks.
-
Brewtools – 1/2″ F-NPT to 19mm hose barb
£16.991/2″ F-NPT-threads to 19mm hose barb.
-
Brewtools – 3-way valve, 34mm TC
£99.99All the ports on the valve are 34mm TC and they are made from high quality stainless steel (SS304).
-
Brewtools – Ball valve, 34mm TC
£49.99Same quality as the three way valve, use where only two port are required
-
Brewtools – 3 way Valve Rebuild Kit
£9.90A rebuild kit with O-rings and PTFE parts to replace the wearing parts of your 3-way valves.
-
Brewtools – Inline Sensor with adapter
£81.99Used to measure the temperature of the wort returning from the cooler.
-
Brewtools – TC 34mm Inline Sensor Holder
£33.99Fits the M10 inline sensor.
-
Brewtools – TC34mm to 19mm hose barb, sensor holder
£35.00Tri-Clamp 34mm to 19mm hose barb with M10 sensor thread.
-
Brewtools – Digital Inline Sensor, M10
£49.99Digital (DS18B20) Inline sensor with M10 threads
-
Brewtools – Dip tube, short
£18.00Fits the flange in both sides of the B40pro and B80pro.
-
Brewtools – O-rings, 18x2mm for dip tube
£4.00Viton is a fluorpolymer based material which is very tough and can withstand most chemicals.
-
Brewtools – TC34mm sight glass classic
£85.00Recommended to use between a 3-way valve on the lower port and the counteflow cooler.
-
Sight Glass, Classic, TC 2″
£88.99Use on Mini Uni's and as a Yeast Brink.
-
Brewtools – Sight Glass, Modern, TC 2″ Minimalistic type
£99.00Modern type with a 2-parts design for easy cleaning and rugged design
-
Brewtools – Sight Glass, Modern, TC34mm Minimalistic type
£69.99Modern type with a 2-parts design for easy cleaning and rugged design
-
Brewtools – Sight Glass, Modern, TC 1.5″ DN32
£96.00Sight glass with TC 1.5" (50.5mm) connectors.
-
Brewtools – Recirc. Fitting, 1/2″ F-NPT For Mashing/Sparging
£26.00Fitting for use on centre pipe/sparge pipe
-
Brewtools – Recirc. Fitting, 10mm hose elbow For Mashing/Sparging
£34.00Fitting for use on centre pipe/sparge pipe
