Valves and Fittings

  • Brewtools - TC 2" to 30mm hose barb

    Brewtools – TC 2″ to 30mm hose barb

    £26.00

    For use on Unitank yeast dump port
  • Brewtools - TC Adapter, 2" to 34mm

    Brewtools – TC Adapter, 2″ to 34mm

    £21.00

    TC Adapter 2" to TC34mm.
  • Brewtools - 4" TC flange, 100mm for Steam Hat

    Brewtools – 4″ TC flange, 100mm for Steam Hat

    £35.00

    A 4" TC flange for use with the steam hat.
  • Brewtools - Clamp, TC 4"

    Brewtools – Clamp, TC 4″

    £16.50

    A 4" TC-clamp for use with Brewtools steam hats. Gaskets sold separately
  • Brewtools - TC Blind Cap, 4"

    Brewtools – TC Blind Cap, 4″

    £19.00

    Blind caps are used to block TC ports not in use.
  • Brewtools - Adjustable Dip Tube, TC34mm

    Brewtools – Adjustable Dip Tube, TC34mm

    £65.00

    The adjustable dip tube allows you to adjust the angle of the dip tube from outside the tank
  • Brewtools - TC34mm Weldless Fitting

    Brewtools – TC34mm Weldless Fitting

    £49.99

    Designed and crafted to minimise visible threads
  • Brewtools - O2/Co2 stone 0.5 micron, G1/8" With gasket

    Brewtools – O2/Co2 stone 0.5 micron, G1/8″ With gasket

    £35.00

    Used with Brewtools holders for o2/co2 stones.
  • Brewtools - TC34mm o2/co2 stone holder, 1/2" M-NPT

    Brewtools – TC34mm o2/co2 stone holder, 1/2″ M-NPT

    £32.00

    Features 1/2" M-NPT threads and is normally used with the TC34mm Tee.
  • Brewtools - TC34mm o2/co2 stone holder, barbed

    Brewtools – TC34mm o2/co2 stone holder, barbed

    £32.00

    TC34mm holder for oxygenation/carbonation stones
  • Brewtools - TC34 tol 19/32" Ball Lock Conn. Adapter

    Brewtools – TC34 tol 19/32″ Ball Lock Conn. Adapter

    £14.99

    TC34mm adapter to 19/32" threads. With gasket.
  • Brewtools - TC34mm to 10mm hose barb

    Brewtools – TC34mm to 10mm hose barb

    £15.50

    Fits 3/8 ID tubing. Can be used for glycol ports on Unitanks.
  • Brewtools - 1/2″ F-NPT to 19mm hose barb

    Brewtools – 1/2″ F-NPT to 19mm hose barb

    £16.99

    1/2″ F-NPT-threads to 19mm hose barb.
  • Brewtools - 3-way valve, 34mm TC

    Brewtools – 3-way valve, 34mm TC

    £99.99

    All the ports on the valve are 34mm TC and they are made from high quality stainless steel (SS304).
  • Brewtools - Ball valve, 34mm TC

    Brewtools – Ball valve, 34mm TC

    £49.99

    Same quality as the three way valve, use where only two port are required
  • Brewtools - Inline Sensor with adapter

    Brewtools – Inline Sensor with adapter

    £81.99

    Used to measure the temperature of the wort returning from the cooler.
  • Brewtools - TC 34mm Inline Sensor Holder

    Brewtools – TC 34mm Inline Sensor Holder

    £33.99

    Fits the M10 inline sensor.
  • Brewtools - TC34mm to 19mm hose barb, sensor holder

    Brewtools – TC34mm to 19mm hose barb, sensor holder

    £35.00

    Tri-Clamp 34mm to 19mm hose barb with M10 sensor thread.
  • Brewtools - Dip tube, short

    Brewtools – Dip tube, short

    £18.00

    Fits the flange in both sides of the B40pro and B80pro.
  • Brewtools - TC34mm sight glass classic

    Brewtools – TC34mm sight glass classic

    £85.00

    Recommended to use between a 3-way valve on the lower port and the counteflow cooler.