Valves and Fittings
Showing 41–60 of 98 results
-
Brewtools – TC 2″ to 30mm hose barb
£21.67For use on Unitank yeast dump port
-
Brewtools – TC Adapter, 2″ to 34mm
£17.50TC Adapter 2" to TC34mm.
-
Brewtools – 4″ TC flange, 100mm for Steam Hat
£29.17A 4" TC flange for use with the steam hat.
-
Brewtools – Clamp, TC 4″
£13.75A 4″ TC-clamp for use with Brewtools steam hats. Gaskets sold separately
-
Brewtools – TC Blind Cap, 4″
£15.83Blind caps are used to block TC ports not in use.
-
Brewtools – Adjustable Dip Tube, TC34mm
£54.17The adjustable dip tube allows you to adjust the angle of the dip tube from outside the tank
-
Brewtools – TC34mm Weldless Fitting
£41.66Designed and crafted to minimise visible threads
-
Brewtools – O2/Co2 stone 0.5 micron, G1/8″ With gasket
£29.17Used with Brewtools holders for o2/co2 stones.
-
Brewtools – TC34mm o2/co2 stone holder, 1/2″ M-NPT
£26.67Features 1/2" M-NPT threads and is normally used with the TC34mm Tee.
-
Brewtools – TC34mm o2/co2 stone holder, barbed
£26.67TC34mm holder for oxygenation/carbonation stones
-
Brewtools – TC34 tol 19/32″ Ball Lock Conn. Adapter
£12.49TC34mm adapter to 19/32" threads. With gasket.
-
Brewtools – TC34mm to 10mm hose barb
£12.92Fits 3/8 ID tubing. Can be used for glycol ports on Unitanks.
Read More -
Brewtools – Aeration spray nozzle 1/2″ NPT
£24.99Spray nozzle used to aerate the wort directly into the fermenting vessel.
-
Brewtools – 1/2″ F-NPT to 19mm hose barb
£14.161/2″ F-NPT-threads to 19mm hose barb.
-
Brewtools – 3-way valve, 34mm TC
£83.33All the ports on the valve are 34mm TC and they are made from high quality stainless steel (SS304).
-
Brewtools – Ball valve, 34mm TC
£41.66Same quality as the three way valve, use where only two port are required
-
Brewtools – Butterfly Valve, TC 1.5″
£58.33Made with the highest possible quality of steel and EPDM.
-
Brewtools – Butterfly Valve, TC 2″
£75.00Made with the highest possible quality of steel and EPDM.
Read More -
Brewtools – Butterfly Valve, TC 3″
£98.33Made with the highest possible quality of steel and EPDM.
-
Brewtools – Butterfly Valve, TC 4″
£129.17Made with the highest possible quality of steel and EPDM.