Stainless Steel Valves & Fittings for Brewing

Stainless steel valves and fittings are the connective tissue of any serious homebrew setup – the parts that attach taps to kettles, connect hoses to vessels, divert flow between runs and keep everything sealed, clean and working properly.

At The Malt Miller, the stainless steel fittings range covers the components most useful in homebrew and small brewery builds: ball valves, weldless tap kits, hose barbs, elbows, sockets and thermowells, all in 304 grade food grade stainless steel. Predominantly 1/2″ BSP to suit our kettles and most standard homebrew vessels, with everything designed to work together as part of a properly built setup.

For tri-clamp fittings, take a look at the dedicated tri-clamp range. For the vessels these fittings work with, see our stainless steel kettles and fermenters.

  • Stainless Flexi Arm 40cm with 1/2inch Hex Nut

    Stainless Flexi Arm 40cm with 1/2inch Hex Nut

    £8.50

    Ideal for C.I.P. in Brewzilla, Grainfather and Brewtools brewing systems
  • Stainless Flexi Arm 80cm with 1/2inch Hex Nut

    Stainless Flexi Arm 80cm with 1/2inch Hex Nut

    £10.00

    Ideal for C.I.P. in Brewzilla, Grainfather and Brewtools brewing systems
  • Weldless Tap kit

    Weldless Tap kit

    £19.99

    This stainless full bore two piece tap has a 1/2 inch bsp nipple with sealing lock nut that includes a silicone washer.

     Awaiting Stock
  • 1/2 inch BSP Stainless Ball Valve Assembly with 13mm Barb

    1/2 inch BSP Stainless Ball Valve Assembly with 13mm Barb

    £16.99

    1/2 inch BSP Stainless Ball Valve Assembly with 13mm Barb.

     Awaiting Stock
  • Ball Valve ½” BSP

    Stainless Steel 2 Piece Tap

    £11.50

    Full bore 1/2 inch bsp female/female.
  • Stainless Steel 3 Piece Tap 1/2" BSP

    Stainless Steel 3 Piece Tap 1/2″ BSP

    £22.00

    Ideal for kettles and fermenters
  • 3 Way Ball Valve to 1/2' Threads (SS 304) - T Port Configuration

    3 Way Ball Valve to 1/2′ Threads (SS 304) – T Port Configuration

    £23.00

    Handy for diverting from pumps to supply two vessels without dismantling any hoses.
  • 3/8" Mini Ball Valve with Rotating Arm

    3/8″ Mini Ball Valve with Rotating Arm

    £16.50

    304 Stainless Steel SS Brewtech racking arm with longer pick up tube for the SS Brewtech products.
  • 1.5" Tri-Clamp Butterfly Valve - 304 Stainless Steel

    1.5″ Tri-Clamp Butterfly Valve – 304 Stainless Steel

    £40.00

    Ideal for cold side as these are far more sanitary than threaded valves
  • Bazooka Hop Filter - fits Brew Kettle Weldless Tap

    Bazooka Hop Filter – fits Brew Kettle Weldless Tap

    £12.50

    Improve clarity of wort from kettle or S40 by adding filter to inside of vessel.
  • Weldless Carb Stone with Mini Ball Valve

    Weldless Carb Stone with Mini Ball Valve

    £25.00

    Add a carb stone to fermenter, simply cut a 17mm hole to add to any vessel
  • Stainless Steel Hose Barb 1/2" BSP Male

    Stainless Steel Hose Barb 1/2″ BSP Male

    £4.50

    Stainless steel hose barb male, screws into the female valves, suitable for 1/2" hosing.
  • Stainless Steel Hose Barb Female

    Stainless Steel Hose Barb Female

    £3.95

    1/2 inch BSP stainless hosebarb.
  • Offer 3/4 NPT THREADED HOSE BARB HIGH FLOW

    3/4 NPT Threaded Hose Barb High Flow

    Original price was: £6.00.Current price is: £2.50.

    3/4 inch NPT threaded hose barb for the bottom ball valves on 7 /14 / Half barrel Chronical fermenters
  • Stainless Steel 1/2 inch BSP socket.

    Stainless Steel 1/2 inch BSP socket.

    £3.50

    Stainless Steel 1/2 inch BSP socket.
  • Stainless Steel 1/2" BSP Bulkhead Fitting

    Stainless Steel 1/2″ BSP Bulkhead Fitting

    £12.20

    21mm hole required. Will fit a vessel up to 17mm thick

     Awaiting Stock
  • Female Stainless Steel 90 Degree Elbow

    Female Stainless Steel 90 Degree Elbow

    £3.50

    Female Stainless steel 90 degree elbow. 1/2 inch BSP.
  • Stainless Steel 90 degree elbow

    Stainless Steel 90 degree elbow

    £3.50

    Stainless steel 90 degree elbow. 1/2 inch BSP.
  • 1/2"BSP Stainless Steel Tee

    1/2″BSP Stainless Steel Tee

    £4.50

    Stainless Steel 1/2" BSP equal tee piece
  • 3/4Inch BSP X 1/2Inch BSP Stainless Reducing Socket

    3/4Inch BSP X 1/2Inch BSP Stainless Reducing Socket

    £3.50

    This reducing socket is made from 304 grade stainless steel and suitable for a wide range of brewery applications.