15 ( US ) Gallon ( 60 ) litre electric brewery using Ss Brewtech TC kettles.

Designed to brew up to 40 litre batches this brewery replicates bigger commercial breweries using two high quality Ss Brewtech 15 Gal TC kettles and the class leading Ss Brewtech TC Mash Tun. Utilising two pumps has the advantage of offering the user options of continuous ( fly ) sparge or batch sparge.

Everything is included to get set up and brewing, the system is designed to sit on a bench or table and as it has two pumps all three vessels can be on the same level.  Both electric elements will require the flex and plugs to be added. We suggest that this is carried out by a qualified electrician. A 32 amp supply is required for the 6kW element that is used in the boil.

The system is manually controlled to make brewing as simple as possible, simply switch the elements and pumps on and off as required. If desired the system can be completely by simply adding the Einbrew 3V3P controller

Ss brewtech 15 Gal Hot Liquor Tun ( HLT )

This is heated via a 3kw tri clamp stainless steel element. Being fitted into the vessel with a tri clamp means it can be taken out and cleaned very easily. The supplied Ss Brewtech temperature gauge has a nice, easy to read face.

2.75KW Heating Element

Stainless steel construction, first the bulkhead is fitted into the HLT the element is the easily put into place using the supplied tri clamp fitting. It is equally easily removed for cleaning.

Ss Brewtech 10 Gal TC Mash Tun

The heart of the system, 304 stainless steel construction, TC connections and recirculation via the top port. Crystal clear wort and fantastic mash efficiency make this piece of equipment a joy to use.

Magnetically coupled pumps

Two strong pumps are supplied with stainless steel heads. Both the in and out ports are via hose barbs connected up with silicone tubing.

Ss Brewtech 15 Gal TC Boil Kettle.

A rapidly achieved and strong boil is very desirable in a boil kettle and this is enabled by a 6kw tri clamp stainless steel element.  At the end of boil the whirlpool can be used via the second  pump, then the wort can be cooled using the stainless steel plate chiller. As with the rest of the system this is connected using stainless steel TC connections and cam locks, both with silicone tubing. For the cold water side of the chiller it is supplied with Hozelock style connectors making the use of a hosepipe very easy

6KW Tri Clamp Element

Of stainless construction, sits within a weldless bulkhead installed with the vessel. Just as with the 2.75KW version fitting and removal is simple with a tri clamp. This is especially important in the boil kettle where proteins build up on the element.

Stainless Steel plate chiller

Set up with cam locks on the wort side and Hozelock style fittings on the water side making set up very easy using your garden hose. Drop the wort from the kettle through the chiller then to the pump to push to your fermenter.

Complete parts list:-

2 x Ss Brewtech 15 Gal TC Kettles

1 x 2.75kw Element Fitted

TC Whirlpool Fitting for boil kettle

2 x The Malt Miller magnetically coupled Pumps

1 x 6kw Element Fitted

1 x Plate Chiller Kit

10m 1/2″ Silicone Tubing

1m 6.6mm Silicone tubing and splicer for Mash Tun Liquor Return

Stainless Steel Cam locks, hose barbs or TC connections for every Fitting

Electrical Requirement:-

32 amp switched commando socket for the 6kw element.

Standard 13 amp 3 pin socket for the 2.75kW element

Both elements will need the flexes to be added by a professional electrician.

Stainless steel table is not supplied but can be purchased separately from Nisbits or ebay.

All stainless threaded fittings such as cam locks and valves will need to attached by the customer and using PTFE tape.

The HLT and boil kettle will be supplied with the bulkhead for the element fitted and leak tested.

Buyers are expected to have some knowledge of brewing practise, this is not a novice brewing system.

Please note that there maybe some changes from the photos displayed