This great value re-usable plastic keg is the best way to store your home brew in a smaller sized container than traditional 19L corny kegs. The small 4 litre size is convenient, light weight and perfect for sharing beverages with friends.

The new shorter profile 4L under 330mm will fit in most esky coolers. You can also dispense with it lying on its side.

This 4L keg is light weight, compact and has high oxygen barrier properties with 3x better (less) gas transmission than traditional PET grades of plastic making it suitable for beer storage or other oxygen sensitive carbonated and non-carbonated beverages.

This package is sold with the 1 x 4L Kegs which include standard cap and 1 x Tapping Head Kit to allow you to dispense through a draft system

The tapping head kit includes 2.5bar pressure relief valve, liquid and gas ball lock posts and dip tube.

What is Oxebar Mono

Oxebar Mono is a PET polymer blend that utilises several polymers blended together to significantly improve gas barrier properties. When compared with standard PET plastic Oxebar Mono is able to reduce oxygen ingress and CO2 loss so your precious beverage is preserved and shelf life extended by x3.

We recommend this product for beer stored in keg up to 6 months.

Dimensions

Diameter: 155mm
Height: 325mm

During normal everyday use Do not Exceed 4 Bar / 58psi or 45°C

Periodic Hydrotesting Requirement

All pressure vessels should be hydrotested periodically.  This is a very simple process and it’s nothing to be feared.

We recommend that this container be pressure tested every 2 years up to 6 bar.

The instructions for this are:
1. Remove RED prv and fit GREY prv (you can borrow one of these from a 19L keg).
2. Fill keg to the absolute brim with water.  DO NOT forget this step.
3. Use bike pump, CO2 regulator, air compressor or any other pressure source to pressurize the keg to 6 bar.
4. Hold the keg at 6 bar for 1 minute
5. Release the pressure and immediately remove GREY prv and swap back to RED prv.

Note: This test should be done with the keg and water in the keg at room temperature 15-30C

For more information about brewing, kegging, packaging beer and serving beer be sure to check out our Help Centre where you can find information covering all subjects for brewers of all levels.

And be sure to check out our YouTube channel where you will find videos about brewing, beers, breweries and products.