Description
Chemclean
- A very effective alkaline cleaner
- Effective on Stainless Steel, soft metals, plastics and glass
- Excellent results in hard and soft water
- Can be used hot or cold
- Removes protein soils, stains, carbon and fatty acids
How to Use
Dilution
50g per 5litres of water for manual cleaning
50g per 20litres of water for soaking
Dosage may be increased up to 5% dependant on soil conditions
Preparation
Before cleaning remove as much loose soil as possible by rinsing off equipment and vessels
Manual Cleaning – scrub all surfaces with the cleaning solution until all surfaces are clean.
Circulation Cleaning – use 50g per 20 litres of water for fermenters, kegs, tanks, and other equipment. Circulate for 30 minutes at up to 60°C. Dilution and circulation time may need to be adjusted dependant on soil load.
Soaking – ensure all equipment to be cleaned is fully immersed. Soak for 4 hours at up to 60°C or allow to soak cold overnight.
Thoroughly rinse equipment after cleaning
The solution can be reused during the cleaning process
Do not use on Teflon coated surfaces
Michael Kennedy –
Very good product for manual cleaning and overnight soaking of equipment but if like me you want to clean kegs by circulation forget it unless you want foam everywhere. Tried using cold water, water @30°C and at 60°C, makes no difference, absolutely ridiculous of the manufacturer even to suggest circulation cleaning with this product.
Richard Clare –
I use this product for CIP via a submersible pump in a 25 litre fermenting bucket to clean my SS fermenter and unitank, also using SS keg cleaner to CIP my Corny kegs. It does foam a bit but it works fine, just use a bigger bucket to hold it!