Description
Add a 1.5″ TC flange to virtually any vessel!
Weld-less design.
Ideal for FTSs and Brew Bucket flat lid pressurised transfers.
Use with Pressurised Transfer Fitting.
304 Stainless Construction.
High heat compatible silicone O-ring.
Compression Fitting 1.5" Tri-Clamp - Bulkhead
Compression Fitting 1.5″ Tri-Clamp – Bulkhead
£23.00
Add a 1.5 inch TC flange to virtually any vessel! Weldless design.
Additional information
| Weight | 0.2 kg |
|---|---|
| Country of Origin | CN |
| HS Code | 7310291000 |
1 review for Compression Fitting 1.5″ Tri-Clamp – Bulkhead
You must be logged in to post a review.
Nigel Macey (verified owner) –
These are superb and very easy to fit – a perfect hassle free triclamp connection!- i purchased 4 of these and used a 40mm Q-Max sheet metal hole punch,i read that these require a 42mm hole but a 40mm diameter hole is all that is required, i purchased a 40mm and an 1-5/8” (42mm) Qmax hole punch to check for the correct size and experimented on an old baking tray first to double check for the correct hole size diameter and the 40mm screwed in perfectly into my 15 Gallon Ss brew kettle to modify it to an all electric conversion.Highly recommended.