This Beer Gun is a great way to fill bottles from a keg, can be used for still or carbonate products with very little fobbing ( foaming) . Every part that comes into contact with beer is stainless steel. This unit features a CO2 purge, which helps to prevent oxidation during filling.

Connect to both the keg out post and regulator with the included Duotight fittings. This allows the beer gun tube to inserted into the bottle, then by pressing the purge button on the CO2 in, the bottle will be purged of Oxygen. Then by pulling the trigger beer from the keg will fill the bottle to the desired level.

Shipped with the fittings required to connect to the “out” post of keg and the grey disconnect from regulator.

These features, coupled with a CO2 jacketing tube for bottle purging and ergonomic valve actuators, makes filling bottles faster, intuitive, more accurate, and easier than ever! Because the Bottle Filler Beer Gun doesn’t require a pressurising stopper, you can fill a bottle of any depth without buying different stem lengths or adding plastic hose extensions.

Includes:
1 x Bottle Filler Beer Gun Unit with gas and liquid trigger with silicone tip. Replacement Tips and Clips can be found here.
1 x 1/4″ x 6.35mm duotight fitting
1 x Red Gas Carbonation Cap x 6.35mm Male duotight fitting (Connect your gas ball lock line directly to the unit)
1 x 1.5-2m Length of 4mm x 8mm EVABarrier Hosing
1 x 8mm Compression x 8mm female duotight fitting Elbow
1 x 8mm duotight x Yellow/Black liquid ball lock disconnect

1 x Spare silicone tip