This particular kit is a one-click option for those who want to be able to brew under pressure with a 60L All Rounder FermZilla.

This kit includes:

1 x Fermzilla Plastic Pressure Kit

1 x Integrated Gauge BlowTie Kit (0-15psi) – Spunding Valve

1 x All rounder tank
1 x Stainless Steel Handle Assembly
1 x 304 stainless stand
1 x Airlock
1 x Pressure rated lid
1 x Digital temperature sticker
1 x Red 2.5bar pressure relief valve
1 x Graduation Sticker

All Rounder dimensions

Easy to Clean
This fermenter is made from super smooth PET so it’s easy to clean.  Just use a small scoop of ChemClean  and wipe it clean after a 5 minute soak.  No scrubbing necessary.

Large 120mm Opening
The opening at the top is signficantly larger then the older Snub Nose or other similar fermenters.  This bad boy has 120mm opening so even brewers with large arms can easily get into the top making cleaning even easier.

Pressure Rated
This fermenter is rated up to 2.5bar so you can force carbonate just like a keg.  You can use this fermenter for closed transfers and signficiantly reduce oxygen exposure.

Crystal Clear
The wall of the All Rounder is crystal clear so you can see what’s going on inside.  This makes it really easy to determine visually how the fermentation, how the yeast is floculating etc.

Impermeable
The PET plastic is not permeable like some other fermenters made from PP or HDPE.  The fermenter wall is a much better gas barrier keeping your product fresher for longer.

No Flavour and Aroma Carry Over
Other HDPE fermenters tend to be so pourous they carry flavour and aroma from one batch to another.

Robust and Difficult to Damage
Impossible to smash like glass.  The tank is impact resistant but light weight and easy to use.

IMPORTANT NOTE: This tank should not be used for hot liquid.  Do not put liquids inside this tank over 50C.  It will melt the tank.  Also this tank comes pressure tested however we recommend that every 2 years you re-hydro test this tank yourself.

Occasionally these units may come with some small indentations/dimples/dents from shipping, this is just a reality of shipping large blow-moulded thin-walled vessels. But don’t panic, these fermenters are designed to endure minor deformations such as this. This was a necessary implementation into the design so that they can withstand some accidental suction from cold crashing and rough handling in transit without compromising their integrity and ability to endure high pressures. All small dents will push out and settle with use and positive pressure and are only an issue and warrant replacement in the rare event they start to show white stress patterns