For customers who want to make their own kegerator or keezer, this is a complete set up. Customers can choose which of the range topping Perlic Faucets, the kit ships with, flow control or standard or perhaps one of each. You just need to select them as an option
This kit is designed to have everything you need to have taps fitted through the door of your fridge. 100m shanks are supplied to pass through the door and a 22mm clearance hole is required, the shanks are supplied with John Guest 3/8 adapters.
We have included 3 x 2m of 3/16 line with John Guest 3/16 to 3/8 adapters. This line can be spliced into the supplied 3/8 beer line if the beer lines need to be balanced enabling fob free pouring in almost any circumstance and it will also enable the CO2 to be brought into the fridge through the drain.
Once customers have added their choice of Perlic Faucet and tap handles, above right, this is a complete liquid side dispense setup.
For the gas side we have included a line splitter, and there are 2 sets of Cornelius keg disconnects with John Guest fittings.
The kit contains:-
2 x Stainless steel shanks with John Guest fittings
4 Meters 3/8 beer line.
3 x 2 Meters of 3/16 beer line with John Guest Adapters.
2 x Grey disconnects with John Guest fittings- Gas in
2 x Black disconnects with John Guest fittings – Beer out
1 x John Guest 3/8 line splitter
1 x Font tap spanner
2 x Slender tap handles
2 x Beer Tap Brush and Plug to keep any nasties out whilst not in use.