The Kegland Kegerator Kit — 2 Tap Kit has everything you need to build the perfect home bar setup. This complete package includes a high-quality Kegland MK4 Dual Gauge CO2 Regulator, flow control Nukataps with matching stainless steel shanks, all necessary beer and gas line with disconnects for easy connection.

Simply select your preferred kegs as an optional add-on to complete your system — ideal for homebrewers and draft beer lovers alike!

What’s Included:

• 1 x Kegland MK5 Dual Gauge CO2 Regulator — precise pressure control for keg systems

• 2 x Nukatap Flow Control Faucets — smooth pouring & adjustable flow rate

• 2 x Stainless Steel Shanks — for fitting Nukataps to your kegerator or fridge wall

• 2 x Black Chrome plated Brass Tap Handles

• 8m x Gas/Beer Line  — strong, food grade, pressure-rated tubing for CO2 and beer supply

• 2 x Duotight Ball Lock Liquid Disconnects — compatible with Cornelius (Corny) style kegs

2 x Duotight Ball Lock Gas Disconnects — secure fit for Corny keg gas posts.

OPTIONAL KEGS:-

Choose from either KegLand stainless steel kegs or KegLand Oxebar PET kegs, or one of each.

Kegland Kegerator Kit — Installation Checklist

✅ 1. Fit the Shanks & Nukatap Flow Control Faucets

• Install the stainless steel shanks into your kegerator or fridge wall, a 22mm clearance hole is required

• Attach the Nukatap flow control taps securely to the shanks.

✅ 2. Connect the Beer Lines

• Attach one end of each beer line to the back of the Nukatap shanks.

• Secure the connection with the Duotight push-fit connectors (no clamps needed).

• Attach the other end to the Duotight Ball Lock Liquid Disconnects, Black and Yellow.

✅ 3. Connect the Gas Lines

• Fit gas lines to the MK4 Regulator outlet using Duotight push-fit connectors.

• Attach the other end to the Duotight Ball Lock Gas Disconnects, Grey and Red

• No clamps needed for Duotight fittings — they’re push-fit for a secure connection.

✅ 4. Install the Regulator

• Place the PTFE washer between the gas bottle and the regulator connection.

• Tighten the regulator nut with a spanner.

✅ 5. Connect to CO2 Cylinder

• Attach the MK4 Regulator to your CO2 cylinder. Tighten securely.

• Ensure the pressure adjustment knob is fully turned counter-clockwise before opening the gas valve.

✅ 6. Attach Disconnects to Kegs

• Connect the Duotight Ball Lock Gas Disconnect ( Grey and Red )  to the gas post (usually marked IN).

• Connect the Duotight Ball Lock Liquid Disconnect ( Black and Yellow )  to the beer post (usually marked OUT).

✅ 7. Set Your Desired Pressure

• Slowly turn the regulator adjustment knob clockwise to set your serving pressure.

• Check both gauges for correct settings.

✅ 8. Test for Leaks

• Spray all connections with soapy water and check for bubbles. Tighten or adjust as needed.

✅ 9. Pour & Enjoy!

• Once your keg is pressurised and lines are chilled — open the Nukatap and enjoy perfect draft beer at home!

For more information about brewing, fermenting, kegging, packaging beer and serving beer be sure to check out our Help Centre where you can find information covering all subjects for brewers of all levels.

And be sure to check out our YouTube channel where you will find videos about brewing, beers, breweries and products