Search results: “adapter” – Page 2
Showing 21–40 of 168 results
-
Brewtools – TC Adapter, 4″ to 2″
£36.67Adapter from TC 4″ to TC 2″. Fits the top flange of Brewtools steam hats. Also for use with Brewtools
-
150mm Carbonation Stone with 1.5″ Tri Clamp Adapter
£75.001.5" Tri clamp carb stone kit. Ideal for BrewBuilt and Brewtools unitanks.
-
Carbonation Stone Adapter 1.5 Inch clamp x 1/4′ thread x 9.5mm duotight barb
£13.33This stainless fitting is 1/4 Inch NPT female threaded rod through the 1.5 Inch Tri-Clover ferrule, the stone remains...
-
Compression Fitting and Garden Hose Adapter for Immersion Chiller
£6.66Easy to fit and makes use of immersion chiller simple
-
Brewtools – TC 3″ CIP adapter TC34mm to 1/2″ M-NPT
£26.67TC34mm to 1/2" M-NPT
-
Hose Adapter 1/2 inch BSP Fitting for Wort Chillers and Outside Taps
£1.67This 1/2 inch BSP hose fitting makes setting up a wort chiller a breeze.
-
Brewtools – TC Adapter, 2″ to 1.5″
£18.33Adapt any 1.5" TC fitting to 2"
-
Brewtools – TC Adapter, 1.5″ to 34mm
£15.00Convert any 34mm TC to 1.5" TC
Read More -
Grainfather Conical Fermenter Power Adapter
£27.08Direct replacement for original part
-
Deluxe Sodastream Cylinder Adapter (with pin adjustment)
£12.49Pin adjustment makes the sodastream cylinder adaptor significantly easier to use.
Read More -
Replacement O Ring for Sodastream Adapter
£0.83Replacement O ring for the Sodastream adapter. These can wear and become flattened or lost, this replaces the original...
Read More -
John Guest 3/8 push fit to 3/8 BSP Adapter PI011213S
£2.50Screws onto the Grainfather conical in place of the exit outlet
-
John Guest 5/16 push fit to 1/4 FFL Adapter PM4508F4S
£2.50Screws onto the the keg grey and black disconnects and is a push fit for the 5/16 beer/gas line.
-
Brewtools – TC 4″ CIP adapter TC34mm to 1/2″ M-NPT
£33.33Used for CIP via the 4" port on steam hats.
Read More -
Brewtools – Inline Sensor with adapter
£68.33Used to measure the temperature of the wort returning from the cooler.
-
Brewtools – Adapter – TC 34mm to TC 50.5mm ( 1.5″ )
£29.17This allows you to use the more common 1.5" Tri-Clamp fittings with the Brewtools system
-
Universal CO2 Regulator Adapter Type C
£2.59Use this adapter with the Universal CO2 Regulator to attach it to a 16g Mini CO2 Bulb.
-
John Guest 3/8 to 5/8 BSP adapter PI451215FS
£3.75This fits on the thread of most tap shanks.
-
JOHN GUEST 1/4 FFL Female to 3/8″ Line Adapter PI4512F4S
£2.50Screws onto black and grey disconnects and is a push fit for the 3/8 beer/gas line.
-
Hose Adapter 1 inch BSP fitting
£2.50This 1 inch BSP hose fitting makes setting up a plate chiller a breeze.