BrewBuilt™ X2 Jacketed Uni Conical Fermenter - 26 Litre

Offer

BrewBuilt™ X2 Jacketed Uni Conical Fermenter – 26 Litre

£694.17

See more product details...

Feature packed professional quality Stainless Steel Unitank / Conical Fermenter

Complete Unitank package

BrewBuilt™ Pressure Pack with Clear Float Technology

Floating racking tube used for taking samples, keg transfers, or serving finished beer.

BrewBuilt™ X2 Neoprene Jacket - 7gal/26L

Upgrade your glycol jacketed 26L (7gal) BrewBuilt™ X2 Stainless Steel Unitank with a neoprene jacket to add further insulation from the ambient temperature

Out of stock

BrewBuilt™ Flex Chamber - Trub Separator & Yeast Harvester

For X-Series Uni's, Gen 3 FermZilla Tri-Conical fermenters and Brewtools Mini Uni's

1.5 Inch Tri Clamp - Pressure and Vacuum Relief Valve (1.5BAR-22psi)

1.5" Tri Clamp Professional grade anti vac - PRV. Protect your pressure rated fermenter

Quantity:
TEST >>1 - 8
Add to Wishlist
Add to Wishlist

Description

The BrewBuilt™ Jacketed Uni Conical was born of thousands of hours of research, contemplation, and development. The engineers and critical minds behind its realisation scoured years of feedback from home and professional brewers alike to determine the ideal feature set of a stainless steel conical fermenter. And where standard features fell short, BrewBuilt™ pushed the boundaries into new territory never before seen on a premium conical fermenter. The end result is a unit purpose-built to advance your fermentation process, improve the quality of your finished beer, and look good doing it. This is the brewing sidekick that you’ll brag to your friends about.

Features:-

  • Highest quality mirror finish.
  • Welded, ground and polished interior welds are the very highest quality and the ultimate for sanitation.
  • Four crossbar reinforced legs are superior for stability, mimicking Pro Uni Tanks.
  • Horizontal ports on the cone, just like pro tanks, allowing your racking arm, carbstone, and thermometer to have a horizontal placement in your tank. This allows for smaller minimum batch sizes, better carbonation, and more.
  • Pressure Relief Valve with pull ring built into the lid.
  • 2″ oversized bottom port and Butterfly Valve.
  • Coolest accessory upgrades like Pressure Pack with Floating Dip Tube, clear Flex Chamber trub collector, Kit for Pressure Fermentation etc.

External Cooling Jacket

When it comes to temperature control for a homebrew conical fermenter the holy grail has been an external cooling jacket. Internal cooling coils have long been the answer and while they are simpler to make and relatively inexpensive, they are harder to clean and have issues cold crashing in warm environments. The Brewbuilt X2 Jacketed Conical offers maximum cooling power without any compromise of sanitation. Welding a jacket on a tank this size has usually been cost prohibitive but the Brewbuilt X2 with jacket is extremely competitive. Circulating cooling solution through the jacket provides you superior cooling power to all coils.

Extra Large 2” T.C. Dump Valve

Dry hop to your heart’s desire. Try as they might, hopheads will have a hard time clogging this conical. With an oversized 2″ bottom port, you’ll have all the clearance you need (and even more than some pro brewers) to drop out your dry hop additions with ease. The slick mirror-polish finish on the inside allows flocculating yeast to collect neatly at the bottom of the cone as they slide right down the smooth interior walls. The butterfly dump valve integrates perfectly with the optional Flex Chamber Trub Separator and Yeast Harvester.

Reinforced Four-Leg Foundation

There’s a common complaint seen in the feedback for other conicals on the market—the tippiness of three-legged units. Three legs may be fine when the fermenter is sitting still on an even surface, but users are often forced to purchase a bracing shelf for more stability if they add casters or leg extensions. A conical is only as worthy as its foundation, so BrewBuilt modeled the X2 after professional-level brewery tanks with a four-leg, reinforced base. This seemingly small design feature is more expensive to produce, but it’s what makes the X2 conical exceedingly stable when compared to other models.  When you fill up your fermenter with delicious fresh wort, you want to trust the vessel that’s holding your latest creation. Brewers shouted from the mountaintops that they wanted stronger, sturdier legs right out of the box that doesn’t require an additional bracing shelf. The four-leg, welded-bar reinforced system is absolutely rock solid. This is an especially critical feature if you plan to add rolling casters so you can easily glide the fermenter around your brewery.

The reinforced four-leg design not only increased the stability and strength of the conical but also allows the unit to stand taller, thereby eliminating the need for extensions in almost every situation. An elbow, a sight glass, or the Flex Chamber can be mounted under the unit with room to spare.

Adjustable Feet

The X2 Jacketed comes standard with reinforced thread-in adjustable feet. If your home brewery has uneven flooring, you can quickly and easily level out the fermenter. The feet can be swapped out with high-quality casters at any time.

Shows Optional Flex Chamber
Shows Optional Flex Chamber & Jacket
Shows Optional Flex Chamber & Jacket
Shows Optional Jacket

Optional Extras

Flex Chamber – Trub Separator & Yeast Harvester
The pressurisable Flex Chamber attaches directly to the butterfly dump valve and can be used for removing trub, harvesting yeast, and many other tasks. Since it’s made from crystal clear Triton, you’ll be able to visually monitor fermentation activity just as you would with a sight glass. Ball lock adapters can be attached to the threaded ports on either side, allowing you to connect oxygenation or carbonation stones, or flush the Flex Chamber with CO2 and use it to inject hops or other ingredients into your conical. Also, a great option for storing yeast! Simply attach a 2″ T.C. end cap or PRV and store your harvested yeast in the fridge for your next fermentation.

Pressure Pack with Clear Float Technology

Adding pressure capability will allow you to ferment, carbonate, and even serve all in one vessel. The Pressure Pack features the unique Clear Float Technology racking tube that can be used for taking samples, transferring to keg, or serving finished beer. This innovative feature draws beer from the top down, which means you’re always pulling the clearest, most sediment-free beer possible. Using pressure to draw a sample from the floating dip tube will also eliminate the tiny bit of oxygen that would be injected into your beer every time the traditional sample valve is opened.Pressure transferring from fermenter to keg is the best way to protect your beer from oxygen when it’s at its most vulnerable state. Kegging could be considered the final hurdle in the brewing process, where limiting oxygen exposure is critical. This could mean the difference between your beer tasting great for months or tasting great for a week. Don’t take any chances. Use the Pressure Pack to keg from the top down and leave sediment behind.

Neoprene Jacket
Improve the insulation of your BrewBuilt Jacketed Stainless Steel Unitank Fermenter with a neoprene jacket. This will insulate your glycol-flooded jacket from the ambient temperature to improve the cooling ability and reduce heat ingress into your Unitank.This added insulation will help insulate your fermentation, maintain stable temperatures and assist with achieving and maintaining cold crash temperatures.

  • X2 Jacketed Uni Conical Features:
    • External Cooling Jacket with 1.5″ Tri-Clamp connections
    • 304 stainless steel construction
    • Mirror polish finish
    • Interior welds are the best in the business – uniquely ground and polished
    • (3) Horizontal welded cone ports
    • (1) 4″ TC Lid Opening
    • (2) 1.5″ TC Lid Openings
    • 2″ TC bottom dump with 2″ TC butterfly valve
    • 1.5″ Thermowell for inserting thermal probe
    • Strong welded in place handles
    • (4) Adjustable feet
    • Silicone tube for blow off
    • Stainless lid clamp & one piece molded gasket
    • Built-in 15 psi PRV

Additional information

Weight 30 kg

Reviews

There are no reviews yet.

Be the first to review “BrewBuilt™ X2 Jacketed Uni Conical Fermenter – 26 Litre”